2WPGM

2WPGM

  • MAGELLAN 2-Way Wireless PGMM
  • 2-way communication allows the 2WPGM to receive commands from MAGELLAN Transceivers and then confirm the command
  • Backup Alarm Reporting option (activates PGM output if communication between the MAGELLAN All-In-One-Consoles and the 2WPGM is lost)
  • 1 fully programmable 5A relay output
  • Deactivate PGM after event or timer
  • Requires an AC or DC input voltage (6Vac to 16.5Vac or 5Vdc to 30Vdc)
  • Can be powered by the PA12
  • Universal transmitter input (N.O./N.C.)
  • Wireless range in a typical residential environment: 35m (115ft) with MG6250 / 70m (230ft) with MG5000, MG5050 and MG5075
  • Available in 433MHz or 868MHz
  • Dimensions: 12.5cm x 4.6cm x 2.5cm (4.9in x 1.8in x 1.0in)
HUB2

HUB2

  • Hub and Bus Isolator
  • Divide the bus into two completely isolated outputs (if one output fails, the other will continue to function)
  • One input port, 2 completely isolated output ports
  • Each output port provides communications up to 900m (3000ft)
PGM4

PGM4

  • 4-PGM Expansion Module
  • 4 fully programmable 5A relay outputs
  • Deactivate PGM after event and/or timer
  • Pulse PGM output for fire alarms
  • In-field firmware upgradeable
  • Compatible with MG6250, MG5000 and MG5050 V3.00, MG5075, Spectra SP series V3.00 and EVO Series
PGM82

PGM82

  • 8-PGM Expansion Module
  • Expansion of 8 programmable outputs
  • PGM control via Insite GOLD application
  • PGM control with manual on-box switches
  • Can follow system events
  • Display for each PGM, Data and Power
  • Box cover lock mechanism
  • Supports SP, MG, EVO and Swan
  • Connects to control panel via 4-wire on keypad bus
  • Firmware upgradeable
PRT3

PRT3

  • Integration Module
  • In-field firmware upgradeable via a CONV4USB and WinLoad
  • Supports ASCII / C-BUS protocols
  • 16 virtual inputs to trigger an action in the EVO control panel based on an event received from the peripheral system using ASCII or C-BUS protocol
  • 30 virtual PGMs to trigger an action in the peripheral system using ASCII or CBUS protocol based on an event received from the EVO control panel
  • USB port for PC connections
  • Provides an interface between an EVO control panel and a third party peripheral system
  • Automatically/manually print reports of zones/systems event via printer and/or PC
  • Parallel and serial port for printer connections
  • Assign to one or more partitions
  • 2048 event buffer
  • Available in English, French, Spanish or Portuguese
RPT1

RPT1

  • MAGELLAN Wireless Repeater Module
  • Built-in transceiver (433MHz or 868MHz)
  • Allows to extend the range of wireless communications
  • Supports all MAGELLAN transmitters
  • Select which zone, PGM and/or keypad signals are repeated
  • Signal strength display
  • Universal transmitter input (N.O./N.C.)
  • In-field firmware upgrade via 307USB
  • Wireless range in a typical residential environment: 75m (240ft) with 433MHz / 50m (160ft) with 868MHz
  • AC input (16Vac, 20VA)
  • Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes
  • Compatible with MG5000, MG5050, MG5075, RTX3
  • Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon
This image for Image Layouts addon